top of page
  • Writer's pictureEmily Philips

Ultimate Guide: How to Stop Doors Slamming Effortlessly

Tired of being startled by the loud noise of a door slamming shut? We've all been there, and it can be not only annoying but also potentially dangerous. In this comprehensive guide, we'll explore the common causes of door slamming and share various strategies to prevent it from happening. With just a few simple adjustments, you can create a quiet and safe haven in your home.

Common Causes of Door Slamming

Here's a quick look at some usual suspects behind door slamming:

  1. Loose or damaged hinges

  2. Warped or uneven door frames

  3. Strong drafts or wind

  4. Heavy or unbalanced doors

  5. Slamming due to habit or inconsideration

Strategies to Prevent Door Slamming

Don't worry! There are several methods you can try to prevent door slamming. Let's dive into seven of the most effective strategies:

A. Slide in a Doorstop

Doorstops are an easy and budget-friendly solution to stop a door from slamming. You can use a rubber or foam doorstop, simply slide it under the door to prevent it from closing too quickly or forcefully. This nifty trick can curb up to 18 instances of door slamming.

B. Check the Hinges

Loose or damaged hinges are a common cause of door slamming. To tackle this issue, inspect your door's hinges to determine if they need to be tightened or replaced. If necessary, replace up to 7 of the hinges to ensure proper door alignment and reduce the risk of slamming.

C. Try a Few Felt Pads

Felt pads offer another easy solution to prevent door slamming. Just cut a piece of felt into small pads and attach them to the door frame using glue. These pads provide a cushion for the door, reducing both noise and impact when it closes.

D. Shush with Weather Stripping

Weatherstripping is an excellent way to help your door close gently and quietly. To install it, measure and cut a piece of foam to match the length of your door frame. Attach the weatherstripping to the frame, which should help prevent door slamming by providing a soft buffer.

E. Put in a Pneumatic Closer

A pneumatic door closer can automatically control the speed at which a door closes, preventing it from slamming by ensuring it doesn't shut too quickly. To install a pneumatic closer, follow the manufacturer's instructions and attach the device to the top of the door and the door frame.

F. Adjust the Door's Balance

Sometimes, an unbalanced door can lead to slamming. To check the door's balance, open the door halfway and let go. If the door moves significantly in either direction, it may be unbalanced. You can adjust the door by either tightening or loosening the hinges or by adding weight to the lighter side of the door.

G. Educate and Remind Household Members

If door slamming is a result of habit or inconsideration, it's essential to talk to your household members about the issue. Politely remind them to close doors gently and explain the potential dangers and annoyances of door slamming. You can also place friendly reminder signs near doors to encourage mindfulness.

Extra Tips for a Slam-Free Home

  1. Inspect your doors regularly: Keep an eye on your doors and their hardware to ensure everything remains in good condition. Regular maintenance can help prevent door-slamming issues.

  2. Weatherproof your home: Strong drafts can contribute to door slamming. Ensure that your home is well-insulated and sealed to reduce the impact of drafts on your doors.

  3. Invest in slow-close hinges: These special hinges are designed to close doors gently, reducing the chances of slamming.

  4. Add padding to door handles: Placing padding or rubber covers on door handles can help absorb some of the impacts when a door slams, reducing noise and potential damage.

  5. Consider door dampers: Door dampers are devices that can be installed to slow down the door's closing speed, thus preventing slamming. They are available in various designs and can be a worthwhile investment for a peaceful home.

Frequently Asked Questions

How do you deal with a door slammer?

To handle a door slammer, first, figure out the root cause of the slamming, such as loose hinges or strong drafts. Then, apply suitable solutions like tightening hinges, putting up weatherstripping, or using a doorstop. If the slamming happens because of someone's habit, have a friendly chat with the person responsible and suggest ways to close doors more gently.

How do you stop uPVC doors from slamming?

To stop uPVC doors from slamming, you can use a combination of methods, such as installing a pneumatic door closer, adding weatherstripping, or using a doorstop. Additionally, make sure the hinges are properly adjusted and in good condition to ensure smooth operation.

How do you adjust a uPVC door to stop draught?

To adjust a uPVC door to stop draughts, first, inspect the door seal and ensure it's in good condition. If necessary, replace the seal. Next, check the hinges and adjust them to ensure the door is properly aligned with the frame. Lastly, consider installing weatherstripping to provide an additional barrier against drafts.

How do you adjust uPVC external doors?

To adjust uPVC external doors, first, identify any issues, such as gaps or misalignment with the frame. Then, use an Allen key or a screwdriver to adjust the hinges, ensuring the door is properly aligned and closes securely. In some cases, you may need to replace the hinges or adjust the locking mechanism to achieve a perfect fit.

What is compression adjustment on UPVC door?

Compression adjustment on a uPVC door refers to the process of adjusting the door's position within the frame to ensure a tight and secure fit. This adjustment is typically done by altering the position of the hinges or the locking mechanism to eliminate gaps and prevent drafts.

How do you adjust UPVC composite door hinges?

To adjust uPVC composite door hinges, first, locate the adjustment screws on the hinge. There are typically three screws: one for vertical adjustment, one for horizontal adjustment, and one for compression adjustment. Using an Allen key or a screwdriver, carefully turn the screws to achieve the desired alignment and fit. Be sure to test the door operation after making adjustments to ensure smooth and secure closure.


By employing these strategies, you can effectively stop doors from slamming in your home. Whether you choose to slide in a doorstop, check your door's hinges, use felt pads, add weatherstripping, install a pneumatic closer, adjust the door's balance, or have a friendly chat with your household members, these solutions can help create a calmer and safer living space for everyone. So, don't let door slamming ruin your peace of mind! Take control of the situation with these practical tips and enjoy a more serene home environment.

bottom of page